Implement a Hub-and-Spoke Network Using Network Connectivity Center recensioni

Nico M. · Recensione inserita oltre un anno fa

Vivesh T. · Recensione inserita oltre un anno fa

Vivesh T. · Recensione inserita oltre un anno fa

CHANG LI L. · Recensione inserita oltre un anno fa

Fabian B. · Recensione inserita oltre un anno fa

تمام

محمد ه. · Recensione inserita oltre un anno fa

Felix M. · Recensione inserita oltre un anno fa

The lab does a really bad job at introducing: - How to manage a hub-and-spoke topology with NCC - The Network Topology tool # The NCC is very opaque and "hub-vpc" is completely left out The lab begins with 3 separate VPCs but hub-vpc ends up never connecting to anything. After clearing step 5 and ensuring both VMs on the spokes can ping each other, SSH-ing to hub-vm and pinging to either spokes through internal IP yields no pingbacks. While this should be obvious because hub-vpc was not a hub nor a spoke in the NCC creation process, one wonders why the "hub-vpc" misnomer and why was it even created here. Also, it is not obvious how I could use NCC to manage traffic for the supposed hub-and-spoke topology. I checked the list of available VPCs through the Cloud console and there was no additional network to manage. There was the "hub-vpc" but that, as mentioned above, was completely detached from the topology. # The Network Topology tool has no data By the time I begin task 6, there was no data on Network Topology. Maybe I am supposed to create more traffic myself so I spammed more pings on the two spoke but after some 2 minutes of trying, the Topology stayed blank. While this might be the 1-hour data block limitation, it would be nice to have something here to explore during the lab. Maybe some more steps to generate some more noise during the previous tasks? Extra: One of the firewall rule supposed for spoke2-vpc is assigned to spoke1-vpc instead (specifically the app-allow-ssh-rdp-spoke2). This does not affect anything of course, because the `app-allow-icmp-spoke2` also allows ssh (of which its spoke1 counterpart has it properly configured to only allow icmp).

Julian L. · Recensione inserita oltre un anno fa

Ricardo Daniel T. · Recensione inserita oltre un anno fa

Christian M. · Recensione inserita oltre un anno fa

Brad B. · Recensione inserita oltre un anno fa

Nurhavid Y. · Recensione inserita oltre un anno fa

Ranjith R. · Recensione inserita oltre un anno fa

kai w. · Recensione inserita oltre un anno fa

Binh N. · Recensione inserita oltre un anno fa

Harine J. · Recensione inserita oltre un anno fa

Safwan L. · Recensione inserita oltre un anno fa

Ricardo Daniel T. · Recensione inserita oltre un anno fa

Manikanda Nagarajan M. · Recensione inserita oltre un anno fa

Gurdeep Singh K. · Recensione inserita oltre un anno fa

Mario H. · Recensione inserita oltre un anno fa

Mike S. · Recensione inserita oltre un anno fa

Pavlovskyi O. · Recensione inserita oltre un anno fa

Vivek Naga Siva I. · Recensione inserita oltre un anno fa

zsdedec df efs dfsf

Ernesto C. · Recensione inserita oltre un anno fa